PMP Examination Preparation – Common Input , Tools and Techniques and Outputs ( ITTO’s )

by on October 21, 2013 in Course Preparation, Featured Articles, Guests Column, PMP®, Project Management, Trainer Articles

PMP Examination Preparation – Common Input , Tools and Techniques and Outputs ( ITTO’s )

The PMP exam is a tough examination which tests your knowledge and your ability to apply it in real life scenarios . While preparing for the exam , you will need to study the processes of each knowledge area . You will also need to understand the inputs , tools and techniques, and outputs (ITTO’s) of each process to know how each process works .

As per PMBOK guide version 4 , there are 9 knowledge areas , 42 processes and 516 ITTO’s , that an aspirant must go through to prepare for the PMP exam . PMP aspirants taking up the exam after july 31 2013 , will have to study based on the changes made in the PMBOK guide version 5 .

As per the PMBOK guide version 5 , there are 47 processes and 10 knowledge areas which one must be prepared with for the exam .

There are some inputs, tools and techniques and outputs of processes, which are commonly referenced throughout the PMBOK Guide and many PMP certification training books. By understanding these commonly referenced ITTO’s in the earlier stages of preparation, an aspirant can save a lot of time while working on the processes and the ITTO’s in detail.

In this article therefore we will take a look at some of the commonly refernced ITTO’s of processes .

Commonly referenced Inputs , Tools , Techniques and Outputs

Common Inputs

  • Enterprise Environmental Factors :
    Enterprise environmental factors are those factors which are not under the control of the project team and yet they influence , control or constrain the project . They are an input to many planning processes .

Some common examples of enterprise environmental factors include

  • Stakeholder risk tolerances
  • Your company’s organizational structure
  • Marketplace conditions
  • Government or industry standards (agency regulations , codes of conduct , quality standards , etc )
  • Political climate
  • Your organziation’s infrastructure
  • Commercial Databases

Organizational Process Assets

Organizational process assets are plans , processes , procedures , knowledge bases and policies which are specific to and used by any organization and are used to successfully plan for any project .

Organizational process assets can be successfully categorized into
1)processes &  procedures and 2) corporate knowledge .

A few examples of organizational process assets are :

  • Templates for common project documents
  • Historical Information
  • Lessons Learned
  • Software Tools
  • Organizational policies , procedures and guidelines on any area .
  • Knowledge bases

Special corporate competencies

According to the experts in the profession , anything that can help you on your current or future project may be considered as an organizational process asset . You could keep contributing to these assets as and when possible .

Project Management Plan

The project management plan is a culmination of all planning processes . It is therefore crucial for project management practitioners and PMP aspirants to understand what it is , where it comes from and how it is used .

The project management plan defines how a project is executed , monitored , controlled and closed .

According to the PMBOK guide , the Develop Project Management Plan is the process of defining , preparing , and coordinating all subsidiary plans and integrating them into a comprehensive project management plan .

The project management plan could be documented at a summary level or may be very detailed .

Some of the components of a project management plan are

  • Scope Management Plan
  • Requirements Management Plan
  • Schedule Management Plan
  • Cost Management Plan
  • Quality Management Plan
  • Process improvement plan
  • Human resource plan
  • Communications Management Plan
  • Risk Management Plan
  • Procurement Management Plan
  • Schedule Baseline

Cost Performance Baseline

Work Performance Information

Any valuable piece of information about the project that is  a result of Direct and
Manage Project Execution process could be considered work performance information . Work performance information provides a sound foundation for project decisions .

Work performance information begins to flow as the actual work on the project
is executed . Project stakeholders including team members and customers needs to be informed regarding the status of the deliverables , how things are performing against cost and schedule goals , how project team is performing and how the product meets the quality standards .

A few other examples of work performance information are implementation status for change requests , and forecasted estimates to complete .

Common Tools :

  • Project Management Information System : (PMIS )
    The project management information system is an important tool to know for the exam .It provides access to tools such as scheduling tools , a work authorization system , a configuration management system , or interfaces to other online automated systems . The PMIS is sometimes cosidered to be an enterprise environmental factor since it is a part of the environment in which the project is performed .

Expert Judgement

This tool is used throughout the PMBOK guide . Expert judgement could be used from within the organization , from paid consultants , or from any other person whenever project managers and team members dont have sufficient expertise . However , as PMP aspirants , you would need to understand that  this tool is highly favoured and very commonly found on planning processes .

Common Outputs

Change Requests

As work is performed on a project , it is quite common for changes to be requested .
There could be many types of changes including a change request to increase or decrease a scope of the project , alter the quality standards , or increase or decrease the budget .

All changes are brought into the process of integrated change management control
where they are evaluated for the impact on the project , and ultimately approved or rejected . Approved change requests usually modify the project management plans including the baselines such as cost baselines , etc .

Change requests are usually related to defect repair , preventive action (changes made to avoid the occurance of a problem ) , or corrective action (any change to bring future results in line with the plan) .

Updates

Updates are yet another tool which is commonly used througout the PMBOK guide  . Updates to plans come out of planning , executing , monitoring and controlling processes. Updates in a project are a common occurance .

Conclusion

PMP aspirants should study  the inputs , tools and techniques & outputs(ITTO’s) of each process as they are an important study topic for the PMP certification exam . Some of the ITTO’s are referenced repeatedly  throughout the PMBOK guide . Studying these commonly used ITTO’s of various processes initially , could help PMP aspirants in reducing the time required to study the processes in each knowledge area .

Reference :
Book : The PMP exam – How to pass your exam on your first try – By Andy Crowe
Book : PMP exam prep – By Rita Mulcahy

 

Sabyasachi PMP Examination Preparation   Common Input , Tools and Techniques and Outputs ( ITTOs )Sabyasachi has over a decade’s experience in leading IT and non IT projects in the Healthcare, Oil and Energy, eCommerce , Public Sector Undertaking , and Services industry . He is a PMI certified Project Management Professional , PMP, and a volunteer in the Project management community with a focus on best practice and mentoring other project management professionals . His writings are regularly published in several blogs , forums and online project management communities.

linkedin logo PMP Examination Preparation   Common Input , Tools and Techniques and Outputs ( ITTOs )

Print article

Leave a Reply

Please complete required fields


You might also likeclose